Gen 4th Hand-held LCD Display 3D Stereoscopic Printing Pen

Gen 4th Hand-held LCD Display 3D Stereoscopic Printing Pen

Sold & Fulfilled by
R 946.99 R 2,600.00
* from 94699 per month with
Dispatched in 10 to 15 working days.
1. Extrusion: Hot melt extrusion molding accumulation
2. Forming: Three-dimensional
3. Print Range: Indefinite
4. Spinning speed: Adjustable
5. Heating temperature in the range: 160- 250 degrees Adjustable
6. Device operating voltage: 12V 3A
7. Nozzle:0.4 mm
8. Suitable for Painters, product designers, hobbyists, children, students, etc.

1. Prolonged use doesn't cause FLAC fatigue.
2.The product is lightweight design: A slim (easy to handle) design. Currently on the market there are several 3D stereoscopic pen, but they are not very comfortable to use i.e bulky, heavy weight, is not conducive to hold control operation. We believe that the design is the closest you can get to USER-Friendly requirements and anti fatigue. Meet the needs of children, students and adults.
3. Control: For some of the design and operation of three-dimensional defects pen on the market, we believe our pen provides users to operate when arbitrary. Unfortunately, however, the current products on the market, have no speed control function, or have a simple switch for speed dial, or even just the speed control switch as an ornament, no practical purpose. Even if there is a file with a speed dial, you must advance or use your other hand to control. You lose the true meaning of the design. We have had practice and exploration and after much research our design includes added variable speed feature, you can freely control it according to the hand speed, allowing users in the creation of real time three-dimensional painting done most practically and with ease.
4. Heating coil and a nozzle cartridge design. In the development stage, we compared the purchase of several products on the market and found these products in the strict sense, is a failure of design, in terms of appearance and use, most importantly, the future users of the product during the replacement of wearing parts and maintenance of great distress. If the heating coil burned out, or nozzle clogging, the user must own bare hands to break up the replacement of the entire product, and deadly is unreasonable due to internal design, users can often open later and then put back. It took three or four hundred or even six or seven hundred to buy back, as long as the bad results would lead to a part failure. This is intolerable by any user. We then optimized based on the improved design defect. Heating coil and the nozzle is integrated cartridge design, just push the button snaps, users can remove themselves necrosis heating coil and nozzles carry plug replacement. Without guidance or manufacturers or distributors to return to re- repair. To users, dealers, manufacturers reduce unnecessary trouble;
5. The temperature adjustable design. Similarly, we find autopsy on the market for only several print pen: the temperature is fixed design, which gives the user tries to use without melting point of drawing supplies a great deal of distress. The real product, need more consideration for users. So we opened up the temperature regulation. Users can adjust itself depending on the supplies to reach the ideal temperature. This is very important when you are using filaments, such as wood filament or flexible filament which respond differently to temperature difference.
6. Intelligent standby functional design. When the user operates the midway break or forget to turn off the power, the product will automatically be converted to standby mode after 5 minutes. Heaters will stop working. Users just beginning to be triggered again heating. Avoid operating the way many users forget to turn off the power after leaving the result in potential danger.

Printer Type 3D Printer
Display LCD Screen
Printing Speed Adjustable
Printing Supplies ABS
Power 12V 3A
Work Environment
Working Temperature 60-230 Degree C
Size 24*24*168mm
Weight 48g
Package Included
Package Contens 1 x Power Adapter
1 x 3D Printer
1 x 3m Printing Filament
1 x English Manual

 How long will my order take to arrive?

Product status Leaves or Seller Overnight Shipping Transit time Economy Shipping Transit Time  Post Office Transit Time
AVAILABLE, dispatched immediately (Purchased before 12pm) Leaves Same day 1 Day 1 to 3 Days N/A
AVAILABLE, dispatched immediately  (Purchased after 12pm) Leaves Next day 1 Day 1 to 3 Days N/A
AVAILABLE, dispatched within (specified) days (Purchased before 12pm) Leaves In (specified) days 1 Day 1 to 3 Days N/A
AVAILABLE, dispatched within (specified) days (Purchased after 12pm) Leaves In (specified) days 1 Day 1 to 3 Days N/A
AVAILABLE, from Overseas Leaves In 5 to 7 working days N/A N/A 15 to 60 Days
Collections (Pietermaritzburg only):
Weekdays: 09h00 to 17h00
Home/Office delivery via courier between 9am - 5pm, Monday to Friday
Note: These delivery times are estimations; it is difficult to guarantee exact delivery times. To find out a more accurate delivery time on the specific items, please call us on 087 237 4746 or email us at

Goods may be returned only when defective, damaged or if the product supplied is not the same product as what was ordered. If the Goods are defective in any way this must be reported as soon as reasonably possible after the product having been delivered to you and must be returned to us within a period of 180 days after delivery. If the Goods are not the same as what was ordered this must be reported within 24 hours of delivery. Any damage must also be immediately reported, within 24 hours of delivery.

Unwanted Goods: To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.

Several types of goods are exempt from being returned. Perishable goods such as food, flowers, newspapers or magazines cannot be returned. We also do not accept products that are intimate or sanitary goods, hazardous materials, or flammable liquids or gases. Special order item* with future shipping days (*SHIPS IN OVER 7 DAYS) of over 7 working days; normal cancellations are not accepted; forced cancellations will incur a 15% restocking charge...