0 items - R 0.00

How can I setup my Wireless-N WiFi Repeater? I need Assistance

Posted by Adewale Adejumo on
Tags: Network

http://www.zasttra.com/products/300m-wireless-n-wifi-repeater-for-802-11n-network-router-range-expander-extender

This Wireless-N WiFi Repeater is a network device designed specially for small business, office, and home office networking requirements. It allows a wireless network to be expanded using multiple access points without the need for a wired backbone to link them. It also backward compatible and works well with other 11b/g and 11n protocol wireless products.

See below on how to setup the device.

 

Alternatively, please see below.

NOTE: Before make sure of the following.
For wireless security, you can only have WEP-64 or WEP-128. Having security disabled works as well, but is not recommended.
You need to know the Network Key of the existing wireless network, if any.
You need to know the Wireless Channel of your existing wireless network.
You need to know the WLAN MAC address of your main wireless router.
Once have done the above please follow the steps bellow to configure the 4402 to repeater mode
:
Open your web browser and type http://192.168.2.1, press Enter. You will be prompted for a Username and Password
Username: admin
Password: admin.
Tags: Network

Older Post Newer Post

0 comments

Leave a comment

Please note, comments must be approved before they are published